Nexen and IQa Engineering put a new spin on rotary index applications: Innovative new design marries clutch and servo motor to deliver a simplified and less expensive solution

Wemmel, Belgium, May 2022. Nexen Group, Inc. provided friction clutches for the servo motors of an eight-station rotary table required for processing workpieces. The rotary indexer solution, engineered by system integrator IQa Engineering, requires less energy and cabinet space, resulting in reduced manufacturing costs and improved overall equipment effectiveness for the end customer.

To save floor space, many machine builders are replacing an in-line process with a circular approach that tends to simplify placement of rotational devices in a manufacturing environment. In assembly or multiple process applications, rotary index tables with multiple stations are gaining popularity. Index tables, fitted with numerous workstations where various sub-processes execute, rotate to the next station as each process is completed until the part is finished and removed. The types of processes occurring at each station are varied and may include machining, inspecting, cleaning, filling, or spinning a part.

The complexity of a rotary indexing process is apparent in the difficulties of incorporating a spinning axis station on a rotary indexing table. In precision applications, a servo or stepper motor is traditionally integrated into each station so the motor can spin the workpiece upon part arrival. This requires that each station have an individual servo motor - necessitating the incorporation of the essential cable management requirements that feed power to the traveling motors, while also managing feedback information transmitted to the servo drives. Undoubtably, this process includes a series of sliprings and the various correlated cable management elements. For example, in an eight-station process where spinning occurs, each station requires a servo motor and the associated power and feedback elements, regardless of whether each individual axis station needs to spin. Therefore, if only three of the eight stations require a spin motion, the machine will need to unnecessarily carry five extra motors.

“What if a solution was available that only engages the process stations needing to spin,” was a question the engineers from IQa Engineering asked. Servo motors are typically coupled to their loads via a fixed member with many connection options, including rigid couplings, bellows style couplings, or couplings with flexible rubber inserts for misalignment. Each of these connections will work wonderfully until the servo needs to be physically disconnected, as in the case discussed here. Limited options are currently available to fully disconnect the load from the motor. Items such as magnetic couplings – a design that always operates with a gap between two elements – struggle to maintain accuracy between the servo and the load due to the natural hysteresis in a magnet. Another option, engaging a V groove or drive cogs, does not address the need for extremely precise alignment to prevent fretting corrosion on the cogs.

“In considering each potential technology solution, maintaining a tight coupling with no slip is of paramount concern. In addition, alignment elements required for certain coupling types add more complexity to the application,” says Tony Kliber, Project Engineer with IQa Engineering. “The key to a successful solution is a coupling technology that is simple to align and will tolerate accelerating the station to the appropriate speed with no slippage.”

In the actual machine example, an eight-station rotary table was required for processing a workpiece. Of those eight stations, three required spinning as part of the process. Each station required a different spinning profile, the most aggressive being an acceleration from 0 to 3000 rpm in 0.25 seconds. After the initial acceleration the workpiece would decelerate to 0 in 0.5 seconds. At that point it was critical that the workpieces were stopped in an orientation that prepared it for the next station, i.e. the servo could not slip at all during the accel/decel.

IQa Engineering established a superior solution that eliminates the extra servos and associated power and feedback complexities of conventional solutions for spinning requirements. The innovative approach uses a modified Nexen friction clutch design providing a simplified mount between the servo motor and clutch.

The clutch was mounted at three stations and is triggered at the appropriate station prior to spinning up. While this is not a typical use for the friction clutch, it held the most promise since its torque profile met the needs of this application. With the friction clutch engaged, the servo would then accelerate in 0.25 secs to 3000 rpm and hold speed throughout the specific process until stopped, at which point the clutch is disengaged. As a precaution, the mechanism was fitted with a sensor to detect any slippage. Initial testing using the servo driven friction clutch showed that no slippage occurred and that the solution provided the necessary spin function – while also simplifying the design, saving costs, and minimizing space requirements.

“We were excited to find that after extensive testing, no slippage was detected during acceleration, meaning our design concept was solid,” Tony Kliber says. After successfully implementing the Nexen solution, IQa realized significant benefits to the system in comparison to having a servo at every station. Some included benefits are five less servo motors, no slip rings, and significantly easier programming since all eight stations did not need to be tracked during processing. The resulting system is lighter and requires less energy to operate, reduced cabinet space, smaller fuses, and less wiring – adding up to reduced manufacturing costs and improved overall equipment effectiveness for the end customer.

IQa Engineering is a full service custom manufacturing equipment builder. The US company designs and builds manufacturing equipment and factory automation solutions. Projects range from small test benches to fully automated processes in industries including assembly, packaging, manufacturing automation, inspection Equipment and material handling.

Nexen develops and manufactures industrial brakes, clutches, torque limiters, rotary indexers, roller pinion systems, overload protection devices and control systems. Headquartered in the USA and with the European head office based in Belgium, Nexen products are available from over 40 sales offices and more than 1,500 distributor outlets worldwide.



About Nexen Group, Inc.:
Nexen Group, Inc. is a worldwide leader in power transmission, linear and rotary motion, and tension control components. Nexen holds 120 US and international patents. A privately held company, Nexen traces its origins back to 1902. For more than 50 years, Nexen has been producing industrial brakes, clutches, torque limiters, overload protection devices and control systems for a variety of industrial applications ranging from packing equipment to sawmills and automobile conveyor systems. Nexen’s customers span every industry – from multi-national corporations to small businesses – and range from design engineers to plant maintenance. Headquartered in the USA and with its European office based in Wemmel, Belgium, Nexen has more 40 sales offices and more than 1,500 distributor outlets worldwide.



Contact:
Nexen Europe Group bvba
Koningin Astridlaan 59 B12
1780 Wemmel, Belgium
Phone: +32 2 461 02 60
Fax: +32 2 461 02 48
E-Mail: europe@nexengroup.com
Internet: www.nexengroup.com

PR Contact:
TPR International
Christiane Tupac-Yupanqui
PO Box 11 40
82133 Olching, Germany
Phone: +49 8142 44 82 301
E-Mail: c.tupac@tradepressrelations.com
Internet: www.tradepressrelations.com